Hi,
I have ACI fabric version 3.2(3n) deployed and have many unused interfaces in the initial deployment. This is dragging the overall Fabric health down. Referred to the following document to suppress fault
How ACI faults are generated and how t...
Yes, that is an option that is currently used. However, the customer has requested to keep all the ports enabled and the only solution is to set the fault severity, as shown in the document, to be disabled for disconnected access ports. The issue is ...
Prasanna,Once the call is established/processed, AS5400 is not capable of inserting any digits. This function of adding digits automatically after the call is established may require special TCL scripts on AS5400.However, AS5400 would transparently s...
Hi Prasanna,I guess what u need is a simple configuration as shown belowvoice-port 1/2/0:d translate called 1!translation-rule 1 rule 0 2055 160221!dial-peer voice 160221 pots destination 160221 port 1/2/0:D!-------------------------The above con...
Hi Please use the following config-----------------------------------router A configurationvoice-port lineA connection plar 4000!voice-port lineB connection plar 4001!dial-peer voice 4000 voip destination 400. session-target ipv4:routerB!dial-pee...