Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello folks, I am having a problem understanding how to create a service on a IP/VC 3511 running 4.2.10 It does not have an EMP so should be able to cope with one conference constantly displaying 4 sites. Now when you create a service you can set the...
My customer has many 3560 switches configured with TACACS and several have no servers under the aaa group server tacacs+ xxxxxxxx command in running config but they are there in the startup config.Some switches do not have them in either config but n...
We have a situation whereby a NT user dials into a Cisco 3620 with digital modems and 12.1(5)T9 ip IOS. Sometimes the users get the blue screen of death whilst dialing in and the fix has been to reboot the router. Wierd but true and the modems have b...
If you have two wan routers each with a link to a remote network and a third router on the ethernet, the third router would have two equal cost routes to the remote router. Now if this third router is fast switching why when you look in the routing t...
Hello, if you register the MCU as SCCP and a conference resource then only SCCP points could initiate a conference as far as I am aware. If could be a meet me conference and a SCCP could start the confernce then the H.323 could join. You should check...
HelloMy problem was with a 3511 which does not have an EMP and to understand the speeds of a 4 way continuous presence call. It they come in at say 192kbps then the resulting stream back to the endpoints is 4x128 + audio (64k) making it 128k send 566...
Hello I think you rather mean how do you integrate the Polycom VSX7000 with the Cisco MCU. Well first you would register your VSX with your gatekeeper as an H.323 endpoint and assuming the Cisco MCU is already in and working then just use the VSX as ...
Hello DevangThe routers at your sites will most probably work now as I am assuming you are set for QoS right now with your VOIP. The routers only pass the packets for video calls unless you use one as a gatekeeper (H.323 system)If you want video endp...
Hello there, the command you are seeking is modifyTargetDevice and note it is case sensitive. From here you have access to the menu as if you had a console connection.All the best Roger.
