Hi everyone, I have this setup Inside OutsidePhone(pots)----h323gw----FWSM-----|--IPphone | callmanager(outside)The ip addresses are as follows on h323gateway to...
Hi, I wanted to define lease time on the relay agent. I was told that the defining lease time on the relay agent does not matter and it will be effective when configured on the DHCP server. Is it true?Cheers,Nagaraja
Hi, I have seen modems failing connecting to vg248 and it depends on many factors...one of the modems having issues with vg248 is US Robotics modem....but again I have even seen it work sometimes..also, there are many settings on vg248 to fine tune....
you can change the input-gain on the voice port...you can change the input gain from from -6 to 14 dB. The default is 0.check this link for a detailed explanation..http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_command_refere...
When qsig sends a connect, it expects ack back and if it does not get it then the t310 expires and tears down the connection. You can however change the t310 timer in the router under the d channel as shown in this link.http://www.cisco.com/en/US/pa...