Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,we have a Cat4006 switch chassis with a supII running CatOS *vomit*. We are upgrading the supII to a supIII which will run IOS.Is there a simple utility to convert the existing config file from CatOS to IOS so that we can just paste the new co...
Hi All,we have a PIX 515E which I did not realise was already authenticating users for VPN (my previous post). Anyways, it turns out that the VPN configuration on the PIX is configured to authenticate against a Windows 2003 IAS server, and this works...
Hi all,we have a PIX 515E with an unrestricted license that we would like to use as a VPN server for remote clients.The LAN is made of NT/2000 based machines, and remote clients will mostly be 2000/XP machines for individual users.I have had a look o...
Hi,we have a remote site with 2 routers, a 2500 series router connected to the LAN and to a wireless network and a 1600 series connected to an ISDN backup link and the LAN.Both the wireless and isdn connect to head office, with the idea being that wh...
Hi,I have already posted this (mistakenly) in the unified communication forum. They suggested that I try it here.We have a machine running Windows 2000 server and functioning as our ICD server (ICD version 2.2(4)).This machine is in a standalone work...
Hi,thanks for the link, I thought I was saved, but unfortunatley, the converted IOS commands are somewhat lacking (eg, its only converted the first 2 modules worth of config, the remaining 4 modules are left out completley).Is there any trick to usin...
Thanks Jay,this has provided a good reference to compare the current config against.One thing that has been brought to my attention though is that the VPN pool in our setup is 172.16.75.1-172.26.75.254, and this is meant to be a class C subnet, howev...
Thankyou all for your responses.I have some of the configuration concerning the VPN configuration of the PIX. I have just verified that there is a route from the core LAN router to the PIX (default route, so any traffic from the vpn subnet should be ...
Hi Jay,thank you very much for your help and for providing the links to the above articles.We are actually running a CSACS server (its running, but hasn't been tested yet) so I am assuming this will do the task, or if not, we will use the RADIUS func...
Thanks for the quick response there.I think I tried setting the 3750 to switchport mode access and the link went off.I will try setting all 4 ports involved to switchport mode access and see if that helps.Just seems odd that the default configuration...
