Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hallo allI am using a WS-C4948 to connect many subnets in different vlans. The 27 bit subnets contain customer servers and one of these subnets conatains 3 "DataDomain Servers" 2 of them have more than one interface in this subnet. The customer-serve...
Hi, I would like to controll traffic from LAN to outside using PIX-FW and Radius. I have found these links which describes the method of controlling access using Radius attributes mapped to users or Groups in Active Directory. What i understood is th...
Hi,I have a router with digital modems in the center and have 10 Remote-sites that use the same subnet Remote-site 1 : Subnet 192.168.1.0/24Remote-site 2 : Subnet 192.168.1.0/24Remote-site 3 : Subnet 192.168.1.0/24and so onEach subnet is equiped with...
Hi,I have a router in the center and have 10 Remote-sites that use the same subnet Remote-site 1 : Subnet 192.168.1.0/24Remote-site 2 : Subnet 192.168.1.0/24Remote-site 3 : Subnet 192.168.1.0/24and so onIst there any way to connect to these subnets a...
Hi,I have big number of dialout connections . That why i am trying to use the concept of "Large Scale Dialout Using TACACS+". The problem that i have is that, in arround 800 situations i should dialout to standalone systems ( Windows PC's) that can b...
Laurent,I have cleared the mac table, still have the same problem.I made further tests and found the the traffic is being received on all interfaces in vlan 400.I am planing to reboot COREG006 and coreg206. Not sure what to do next!!I 'll be graet if...
Hier are some traces that i have done.20-ping-mm-hab.pcap: The trace conatains wireshark data collected from Port 20 and the pings were done form 2 different systems to the ips 172.18.0.14 & 172.18.0.16.Hier are some traces that i have done.41-ping-m...
Hi Laurent,Thanks for answeringI have done the following tests1- Pings from COREG006 or COREG206 -> 172.18.0.16 are seen only on int 41 ( the system 172.18.0.16 is connected to interface 41).2- Pings from COREG006 or CORG206-> 172.18.0.14 are seen on...
Urgent help needed:**********************Dear i have a problem with the password recovery for MDS 9140. I have used the procedure of break sequence Crtl+] with no sucsess. I have tried another compinations but with no sucsess also. According to the d...
Hi, Is there any way to automate the authentication issue, i mean that the user will not give the credentials in an interactive way. Some thing like a service or program that answers the authentication request from the pix by using the cashed windows...
