Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone has tried configuring bridge mode on the uBR10000 CMTS? I know it can be done on the uBR7100, but need to confirm if it will work on the uBR10000. Thanks.
Anyone with experience configuring VLANs on the LRE port for the Cisco 2924 :LRE XL? I want to be able to assign 1 VLAN to 1 room for a hotel deployment. Thanks.
I understand that you can either use DHCP options 66 or 150 to define a TFTP server.Does anyone know what is the DHCP option to define an FTP server?Thanks.
Hi,has anyone succeeded in changing the security settings (Authentication Types: Open, Shared, Network-EAP) for SSID ID [0] using WLSE?I know it can be done for SSIDs [1] and above, but how about [0]?I am running WLSE v1.3.1, and Cisco 1200 AP on 12....
Hi,I have tried operating my notebook with both a Cisco Aironet wireless LAN adapter and my fastethernet port active.By doing a trace-route, I notice that my data is sometimes transmitted via my wireless LAN adapter, and sometimes via my NIC.I initia...
Hi Peter, thanks so much for your reply. The connection in every room is using a Cisco 575 LRE CPE. This is connected to the LRE switch via a Cisco POTS splitter, thru the motel's existing phone cables. I am using the LRE switch to terminate the conn...
Yes. I want to configure VLANs on the LRE interface, I am trying to deploy LRE for a small motel, and their requirement is to have each guest-room in a separate VLAN. Any idea how to do it?
Hi,this is exactly what I am doing too. I leave all the boxes unchecked, and it seems to work.I assume that you are using SSID ID [0] for the "management vlan". Are you able to change the type of security association for SSID [0] using the CiscoWorks...
