Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 4331 forward deployed with a hard disk for additional storage. I'd like to use that hard disk for holding IOS files that other local routers can pull from instead of over the slower wan link. How do I syntax pushing and pulling code direct w...
We are trying to SCP files from a core server to multiple devices and SolarWinds SCP fails with IOS-XE files larger than around 450 MB. In a lab I'm trying to use instead OpenSSH on a windows 10 laptop but my test routers fail to connect. I am able t...
Hi everyone,
I've got 8841 phones at one of my customer offices that are not able to make or receive calls. The phones will receive IP addresses and register in CM but when called or attempting to call out will fail with either silence or a fast bu...
With a bit more luck I found the answer:scp c880data-universalk9-mz.157-3.M4a.bin username@5.5.5.5:flash:/c880data-universalk9-mz.157-3.M4a.bin replace flash with harddisk, usb0, etc etc
Hi GeorgI understand that part when on the router with the disk but what I'm trying to do is copy to the hard disk direct from an external source and then later from that disk to the local routers. Is there a way in that SCP url that the router will ...
On the GRE tunnel leaving the site router to the next hop. The phone was defaulting to a higher value than the circuit was capable and without the mss adjust it wasn't correcting the phone.
Resolved: Was simple MTU again. Base MTU was set to 1300 but no adjust-mss. Once we implemented that it ran stable. No users on site now to verify but I'll post again if different.
Additional details we've found:Status message view shows TCP Timeouts, not shown at other officesDebug view shows Reason 10 and 18 for reason for out of service. Details on what those mean I found elsewhere:10 -- TCPtimedOut - The TCP connection ...
