Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ihave two 1400 bridged 11 miles apart. I am using 28dbi dish antennas on both ends. The bridges associate, authenticate then drop the link in a matter of seconds. The event I keep seeing in the log at the non-roote side is: "parent lost: Received ...
1. What is the practical limit for the amount of client addressess to overload to one public IP address.2. Can a NAT outisde interface be used for NATed addresses and public inside addressing at the same time.thanks
I have two BRI connections both connected to the same endpoints. I am having tourplbe bringing 4 connections active at the same time. It does not seem to be a matter of load. I have transferred large files and the 4th conection does not come active...
I apologize to those who notice I posted this to two areas. I am new to this and did not see the access server site.I have two sites with two ISDN BRIs each. I have a configuration that one site initiates the call to the other site. I have PPP multi...
I have two sites with two ISDN BRIs each. I have a configuration that one site initiates the call to the other site. I have PPP multilink on the bri interfaces and the dialer interface. I have used various values for dialer load-threshold from 1 - 1...
I understand the answer. I have a followup question. How far apart can the antennas be separated before they no lnger conntribute to the diversity benefit.
Tha number seems high. The Aironet site survey I class I attended, that was supposed to be supported by Cisco, stated the minimum S/N ratio for 11MB was 12dB. Was this class incorrect.
