Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Community Member Test environment: Third-party vendor has a Radius cloud server, Company has a Cisco WLC 3504 is authenticated and authorized through by public Radius Server. 1/Create user on the server.2/Config AAA on the wlc and WAN pro...
Hi, brAt the moment, I have a strange problem about with Cisco AP add to FlexConnect Groups-custom groups not default flexconnect group.Environment:A new Cisco AP 1700i (fitap)Cisco AP 1700i is already registered to the WLC5508Wireless Management Ver...
Hello, Experts: The content is to do wireless 802.1x certification for WLC3504 in the wireless project, and build ISE2.0.0.306 to simulate customer environment test:Requirements: The authentication policy passes the wireless 802.1x authentic...
Hi, brotherI found out it，forward down link ：https://community.cisco.com/t5/security-documents/ise-and-catalyst-9800-series-integration-guide/ta-p/3753060#toc-hId--689850627 About ：Note of DACLNote: dACL is only supported in centrally switched traffi...
Hi, everyoneI have solved this problem. If you encounter similar problems, please refer to the following document:;)https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/flexconnect_groups.html
Hello，Greg； I make AUTHC conditions change to MAB，IPhone test connect SSID is successful . Why I can't connect to 802.1× with SSID 802.1x is standard want to uses PEAP protocol for 802.1x. exclude compatible issue.Does anything to do with...
