About samksam77in

samksam77in · 09-06-2018

I have 2 questions1. If i configure police with cir so i need to mention bc or let router do on its own2. I have 2000 tokens in my bucket left after sending traffic. say 4 next 10 min i don't receive any traffic .suddenly i receive traffic so my buck...

samksam77in · 04-28-2017

Hi All, Need assistance in configuring this Multihome BGP scenario where i want to advertise 201.201.201.0/24 & 110.110.110.0/24 on both upstream for redundancy at POP site and priority for these two subnets should be upstream 2, in case upstream 2 ...

samksam77in · 04-27-2017

Hi All, Need assistance in configuring this Multihome BGP scenario where i want to advertise 201.201.201.0/24 & 110.110.110.0/24 on both upstream for redundancy at POP site and priority for these two subnets should be upstream 2, in case upstream 2 ...

samksam77in · 01-15-2017

Dear Friends, Seek your help for solution on dual Wan link from two different ISPs on two different routers with my own /24 subnet advertising on both ISPs however need help in configuring the EBGP with fail over and HSRP, priority to 30mb link a...

samksam77in · 01-29-2015

I need solution from ISP perspective to have two different Routers configured BGP peering with Upstream Provider from Cisco 7606 by advertising some 10-15 /24 subnets and secondly from another Router peering with Domestic internet exchange with those...

samksam77in · 05-08-2017

Hi, Thanks for your valuable response however what i am looking for is to configure ibgp between two internal Routers (IDC and POP) which are located away from each other and have a P2P connectivity between them, currently upstream1 is connected to I...

samksam77in · 05-02-2017

Thanks a lot again for the efforts you put in to provide with detailed information, would try the same out and would be happy to let you know the outcome. Sam.

samksam77in · 05-02-2017

Thanks a lor chrihussey. Would you be able to help me with some sample configuration template to understand the implementation in a better way. Sam.

samksam77in · 01-16-2017

Thanks a lot for your valuable information thru which I could cross verify certain things however I m struggling to understand how to configure automatic fail over between two routers to achieve redundancy based on HSRP. Because my 6mb link is prefe...

Member Since	‎01-28-2015 11:32 AM
Date Last Visited	‎10-11-2018 02:09 PM
Posts	11

User Statistics

User Activity

QOS for CCIE

Subnet advertisement on Multiple Router with Redundancy

How to : Subnet advertisement on Multiple Router with Redundancy

2 ISP Wan Links 30 & 6mb need fail over solution with EBGP and HSRP.

BGP peering with multiple Neighbors with same AS but from different Routers

Hi,

Thanks a lot again for the

Thanks a lor chrihussey.

Thanks a lot for your