Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have one end that doesn't support auto-mdix feature (namely WS-X6348-RJ-45 module on 6509) and other end does support (HP blade PCs switch) auto-mdix and it is enabled. Does anybody know what I should see on HP end - MDI or MDIX? Should I FOR...
Hello,Does anyone know if it's possible to text message another user that is connected to the same switch? In my case it's a Catalyst 6509 running CatOS 8-5-2.Thank you.
Does anyone know if there is a way to truncate the syslog message? For example, I get this error forwarded to me by CiscoWorks:"Syslog message generated from device XXXX: Feb 26 03:05:07 X.X.X.X 2006 Feb 26 03:01:15 eastern -05:00 %KERNEL-1-CREATEPRO...
Hello,I have 2 routers - one for local office and the other for remote office. They will be connected via T1 when it's installed. Now, I configured them both (1700 and 2600), and they both have DSU/CSU cards just like this one: http://www.tancom.com/...
Hello,DFM 1.2 reports that several of our 6509 switches have insufficient NVRAM memory. After I telnet to one of the switches reported, and running sh ver command I see the followingNVRAM total: 512KNVRAM used: 446KNVRAM free: 66KThen, I copied confi...
Login to CiscoWorks. Go to Server>Admin under Common Services. Then go to processes and check mark SyslogCollector and SyslogAnalyzer processes and stop them. Note: if you restart your server, those processes will restart automatically. You might wan...
Thanks Masood,Actually this message was generated from CatOS running on 6509 switch. I'm not concerned about the database, I just want to truncate beginning of the syslog message which contains name of the device and date, both of which are added by ...
Even if you follow steps from Cisco website, it still may not work for you. In my case, I was unable to send Break from Windows NT to the 6509 msfc card. The only solution I found was to download Telnet program from the third party. I used Advanced T...
