Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have NM-1T3/E3 in 3662 router, which is the mail location. The line is DS3 in main site and T1's in remote sites, ESF B8ZS, HDLC. Could some one give me a simple config or an example of how to configure this with at least 2 remote sites. I can't fi...
Hello, could some one help me with this setup or a sample config, I would really use some help. Here is what i have in main router 3660(MR) with NM-1T3/E3 in slot3 and 3 routers(RR#) 2800 in remote locations wit T1 card. I need to connect MR to RR1, ...
Hello, Main Office(MO) has cisco3660 and PIX515, Remote Office(RO)has either pix or a cisco router to connect to MO via VPN. We want to build an identical datacenter which is connected to MO with direct line(100mb). Data replication is not a proble, ...
I cant figure out (1) how can i deny port 25 to all users on network and permit smtp for Exchange server, also I have MS Exchange which runs web and smtp and in my configuration below you can see that it has static mapping to publick ip with http/smt...
Thanks gpauwen for a quick response. in line " interface Serial1/0.101 point-to-point", do i have to use point-to-point, does it mean anything. Can i also use ( : ) instead of ( . ), like Serial1/0:101 ?Thanks
Hey, thank you for your help, but users are still able to use outside smtp, when i login to pix PDM in access rules i have all my access-list 101 going from 1 to 7, but before the first rule, PDM has a no number rule (Implicit outbound rule) basicall...
Hi, thenk you for your info. I got the VLAN on switches part and guess what i do have DELL 3248 switches. I didn't get the routers part, what shoud i do on the router? What commands/programming should i add to a interface fastethernet0? I already hav...
