Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Q. How can I assign Domain Naming System (DNS) and Windows Internet Naming Service (WINS) server IP addresses for PPP connections from ACS using RADIUS?A. You can specify DNS and WINS server IP addresses from the ACS on a per-user basis or for ...
Hello,i'd like to make a site-to-site with PIX 515 and IOS 6.3(3) but i'd like to use the PAT for my private network.I use the acl for mark the traffic into the tunnel, but the other site the traffic match the acl but doesn't come into the tunnel.Can...
Hello,i've made a VPN site-to-site between PIXs and i use the pat for my network.i use the ACL for traffic encapsulation and the peer goes up but it doesn't work:ISAKMP (0:0): Detected NAT-D payloadISAKMP (0:0): NAT does not match MINE hashhash recei...
Hello,i'm configuring a PPP between two serial in bundle with ppp multilink,and a backup with controller E1 PRI in ppp multilink.The backup doesn't work well,because i think there is a problem with ppp multilink.I created a profile of virtual-templat...
Hi all,i'm studying a different solutions for my network topology.i'd like share the same lan in two different sites.I use a catalyst 3550 and a router cisco 26XM for the WAN,and i create the vlans in the cat and after i make encapsulation 802.1q or ...
Hi,i must share the same lan in two different sites, it's a migration of my central office.I'm trying use encapsulation and bridging.I known that the link WAN must be dedicate for transport , but it's not clear if works correctly with tagging.I try a...
I studied an example in BSCI,i can use the virtual-link in ospf,but it doesn't work.Ok,can i use trunk between 2 routers and i sue encapsulation dot1q or isl and so i use in two site the same network,because if i use the bridging the link between the...
Hi, i made to upgrade the release but i have again the problems, now ia analizing traffic on the lan, but i think there's a problem of memory,like to see in the log.I have 2 routers 7200 with snasw and dlsw, and now i stopped the snasw on a router be...
Hi Roberto,thank for your response.I have this release in my cat4503 :cat4000-is-mz.121-12c.EW2.binand the model is :cisco WS-C4503 (XPC8245) processor (revision 7)and there isn't the LCAP command,i need upgrade the release to 12.1.19(EW).I'm not sur...
Ciao,do u speak italian?So, this problem has been for this site and my topology network is :client-----Proxy Microsoft----pix firewall----router---internetand i don't understand why there is this problem,maybe the proxy works with dns and what i do f...
