Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a AP1200 that has no IOS in the flash I need the procedure to upload a new IOS from the boot loader and extract it from the .tar file, I cant find the procedure using the search option.Thanks in advance,Willian
Hi All,I am trying to acess an mainframe with SNA emulation from a ethernet network conected to a token-ring network with a Cisco 2600 router. the configuration of the router is this:Building configuration...Current configuration : 2590 bytes!version...
Hello,Does anyone knows why I can´t find the radius-server command, so I can specify the radius server host and key on both:cisco WS-C2924-XL IOS Version 12.0(5.3)WC(1)cisco WS-C2924-XL IOS Version 11. 2 (810) -SA6they have all the other commands:aaa...
Hi,I need to use a RADIUS Authentication in a Catalyst 2924, but not for all the authenticated RADIUS users but only for a group of users.with this configuration, all users that have an radius login/pass can login, but the same RADIUS server authenti...
Hi all,I need to implement load balancing between a Nortel Passport and a Cisco 3600 router, there are 4 serial links connecting them ( 3 128K and 1 256K), i am using static route pointing the same network address for all links, but Cisco IOS balance...
First of all thanks for your help...ok in the 2924 I am using the following configuration:aaa new-modelaaa authentication login default group radius localaaa authorization exec default group radius localradius-server host "server" auth-port 1645 acct...
I tried to use Multilink PPP, but the Nortel Passport do not support it so it won´t work, I think the only option that I have is using OSPF....Does anyone have another ideia that will work between a Cisco 3600 and a Nortel Passport ?Regards,Willian P...
Steve,Do you know if I can stay with the ip address on my interfaces? it will still work? Since I am not using any routing protocol if I loose my ip addresses all my static routes will not work.Regards, Willian Prando
