Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello team,
Hello, I am configuring a C600v VM with the configuration of a C600V.I put the same version of VM and appliance to avoid configuration problems but nothing works every time. Here I encountered problems on the resource text with UTF-8, ...
Hello everyone,
Currently I have a problem with the use of the SFP ports in my configuration on the CBS350. I am not able to use the two fibre ports at the same time in the SFP ports.The first one is recognized as fiber but the second one is recogniz...
Hello teams,
hello to all,Currently I have two problems with the installation of CBS350 equipment on my client's LAN. Here are my problems: - 1 : Problem of recognition of the type of ports My customer wants a 10Gb/s LACP to the 9500 with SFP+. I'm n...
Hello,
i use this software for my CBS : image_cbs350_ros_3.2.0.84_release_cisco_signed
It's weird, because I put the SFP+ on the first port it is recognized as 10G BASE-LR but no link. When I take the same SFP and put it on the second port, it works...
Hello,
I have a problem too, impossible to use two fiber ports in the 10Gb/s module. I'm not sure if it's a good idea to use the same port for both modules.Do you know if it's possible to force the media type?
Hello,
I made this to show you the type of SFP used on the CBS350 and on the Catalyst 9500.The problem is that port 9 or 10 depending on the switch doesn't take into account the SFP, and during an interface show I see that it is in Copper combo and n...
