Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllWe have for many years been running ACI with VPC to UCS IC`s . And it has been working fine.We are in the progress of setting up a new ACI fabric, that will connect to the same UCS IC`sBoth ACI fabrics run with a physical Vlan Pool 1-500,900-12...
Hi We have provisioned some of our existing wlc`s into DNA. And have had some problems around our voice setup. Our existing WLAN setup had CCKM enabled for old 7925 cisco iphones. However the CCKM option is nowhere to be found in DNA, so in order to ...
Hi
After upgrading FMC (appliance) from 6.2.2.2 to 6.2.3, im unable to deploy policies to our FP2130 running 6.2.2.4, and 5525-X running 6.2.2.1
All of 6.2.2.x should be "manageable" by FMC 6.2.3. So to my understanding i should be able to deplo...
Hi
I have a switch template i would like to use for our standard 2960X deployments. However im running into some problems when using this template when deploying via Prime infrastructure 3.2 , and APIC-EM Version 1.4.3.1009.
Deploying the template ...
Thanks for your reply Robert.1. No it`s not setup yet. But that is the plan.2. There are 4 AEP`s for connecting the FI`s. FI1A_AEP , FI1B_AEP and FI2A_AEP, FI2B_AEP. These assigned to same vlan-pool and pyshical domain.Have only tested the FI1A_AE...
We had the same fault. Runnin 7.0.1 ftd. Had to change url in app settings in azure.Replace the capital letters as follows. https://vpn.compnay.com/+CSCOE+/saml/sp/acs?tgname=Azure-MFA This worked for us, neither TAC or our cisco partner where able ...
Thanks for your reply.
I have tested this today, and guess what its working as expected.
We did a patch/upgrade PI 3.2.1 Maintenance Release. This seems to have solved this issue.
