Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Did anyone of you ever notice that at this time it seems impossible to set the NTP source interface to a Loopback interface which is presistent ?In software versions 12.4.24T and 24T1 the NTP source command is parsed before the loopback so it will...
Hi,We have an 2811 which uses crypto and nat.This router consumes all of its IO memory over time and starts generating alloc failures.IF we compare the memory usage of the io memory to a healty router with a comparable config it had several 65Kb memo...
Hi,We have two core switches on a lan, they both have a gbit wan connection to the wan cloud.the strange thing is that one switch shows input drops without ever seeming to have a queue, the other switch has no input drops.Input queue: 0/75/981068/0 (...
Hi,We are trying to set up command authoristaion.On VTY evrythings working out but it is not authorising anything on console.In debugging aaa authorisation it only tells me :Jun 17 01:45:50: AAA/AUTHOR: authenticated console user is permittedAnyone a...
I have the same problem, it disapears because the ntp source interface Lox command is parsed before the loopback interface is created.It seems like a bug but i could not find much about it.
We have not used this version as i believe it was not available at the time we were investigating this.But anyway the bug behaviour does not seem to be predictable as we still have allmost similar configured routers which do not have the problems wit...
The problem seems to be solved by upgrading to 12.4 19b software.The profile however does not meet our situation entirely because we are not running on high cpu load. in normal behaviour the highest peeks with shoe proc cpu his are registered te be 5...
It sure looks like it, but my question is how do I confirm that it is an known bug or not.I will not be able te know if newer ios code will fix it or not if i can not indentify the bug.
You are actualy not running a dot1q trunk on your switch.Since switchport multi means that the vlans mentioned are sent untagged only the default vlan will work.On the 2950 trunk to your router you should configure :switchport mode trunkswitchport tr...
