Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a lab that needs internet connectivity through out enterprise network.We would like to put a router in between our lab and enterprise and NAT from the lab into the enterprise because the lab has overlapping subnets. We are running OSPF and t...
I have a few APs in place running WDS. The APs are authenticating to ACS and ACS is authenticating users to Active Directory. When a user successfully logs into the wireless,ACS recognizes they came in through the wirelees,how do I get ACS to assign...
I have two main locations each with their own Internet connection. There is a Frame relay connection between the two main locations and a Frame relay connection to 6 remotes, a PVC to each main location. Right now static routes are configured in the...
We have a customer that would like to stage his Sup720 in our 6506 before implementing them into his network. He has the power supplies to support the power requirements and he has also purchased the Fan tray upgrade. However, the fan tray is for a...
I have a 7204 with a T3 (PA)module. I would like to take 3 T1s from the T3 and map them to a 4 port (PA) T1 module. Does anyone happen to have any documentation on how to configure this?
set your root AP up as a radius server. Define a username/password. This username/password will be used by the non-root ap.Go into the non-root ap and configure your Encryption accordingly and configure the SSID to match the root ap. From the SSID ...
I just ran into the ACS version 3.3.3 and WDS/WLSE bug related problem. As a work around I enabled Radius on the WDS root AP, created a username/password for the infrastructure APs, and WLSE. Set the infrastructure group under the WDS settings to au...
