About Danijela

Danijela · 01-28-2004

Hi everyone, I couldn’t find information about applying an ACL to an interface…..I am interested in what happens with packets that are already in interface buffer in the moment when you apply an ACL ?Regards, Danijela

Danijela · 11-19-2002

I'm writting mcast implementation proposal for national academic network in Croatia. / CARNet /I'm interested in your experience with RP configurations because I'm not shure which is best to implement:1.) Auto-RP with Static RP as backup2.) Anycast ...

Danijela · 10-10-2002

Hi,I decided to implement CGMP rather than IGMP Snooping to prevent mcast flooding on switches. This seems easy to configure when you have last hop router,ONE switch and than receiver. But, how to configure CGMP when you have TWO L2 switches before r...

Danijela · 02-04-2004

Thanks Vincent. I asked that because obvious drawback of original configuration is that it doesn’t perform load sharing.Regards, Danijela

Danijela · 02-02-2004

I am just interested, can you put different secondary addresses in different HRSP groups ?If you have previous config with secondary addressing, can you put different seccondary addresses in different HRSP groups, something like this: standby 1 ip 19...

Danijela · 10-14-2002

Could you tell me why in your opinion is ICMP snooping is better? I've read that when you enable IGMP Snooping then switch listen to ALL layer 2 multicast packets in order to identify IGMP packet. This can have a significant impact on the switch’s pe...

Member Since	‎10-10-2002 03:53 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

aplying ACL to an interface

Multicast RP configuration

Problem in configuring CGMP on switches

Re: Confirming HSRP Operation....

Re: Confirming HSRP Operation....

Re: Problem in configuring CGMP on switches