Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi together,the WIC-1ENET documentation tells me:The MPC 860 microprocessor (revision B5 or later) is required for using the Cisco WIC-1ENET card.This processor has been applied to all Cisco 1700 series routers shipped after November 21, 1999.The "sh...
Hi all together,Ive got a problem with a 2600 IOS 12.2(5a). Two BRIs are connected to the same S0. I want one Interface answer to one ISDN number, the other to annother ISDN number. If I configure isdn answer1 on a interface, the interface does not r...
Hi all,I tried on a ISR4451, IOS XE 3.16 (15.5.3).You do not even have to configure a snmp user. Use the following command in (config-vrf) mode or (config-vrf-af) mode.snmp context <context name> community <community> roThat done, you can usesnmpwalk...
Hi Tobias,thank you for this information. The bug description lists 16.12(1.10) as the only "known fixed", version which I could not find in the download area on cco.
I think the "ip dhcp relay address" should be configured on the server's vlan interface, and point to the directed broadcast address of the client vlan. Something like: interface Vlan172ip dhcp relay address 10.10.3.255...interface Vlan1020no shutdow...
The problem is that I don't know exactly when the routers were purchased. They belong to a new customer of us. Assuming that the format of the processor board serial number is the same as the format of the router serial, the routers were manufactured...
