About uhabbe

uhabbe · 01-13-2003

Hi together,the WIC-1ENET documentation tells me:The MPC 860 microprocessor (revision B5 or later) is required for using the Cisco WIC-1ENET card.This processor has been applied to all Cisco 1700 series routers shipped after November 21, 1999.The "sh...

uhabbe · 10-16-2002

Hi all together,Ive got a problem with a 2600 IOS 12.2(5a). Two BRIs are connected to the same S0. I want one Interface answer to one ISDN number, the other to annother ISDN number. If I configure isdn answer1 on a interface, the interface does not r...

uhabbe · 04-24-2020

Hi all,I tried on a ISR4451, IOS XE 3.16 (15.5.3).You do not even have to configure a snmp user. Use the following command in (config-vrf) mode or (config-vrf-af) mode.snmp context <context name> community <community> roThat done, you can usesnmpwalk...

uhabbe · 11-21-2019

Hi Tobias,thank you for this information. The bug description lists 16.12(1.10) as the only "known fixed", version which I could not find in the download area on cco.

uhabbe · 11-18-2019

Looks a lot like bug CSCvq22224. 16.9.3 is known affected, "fixed" release not yet available for the public.

uhabbe · 04-17-2019

I think the "ip dhcp relay address" should be configured on the server's vlan interface, and point to the directed broadcast address of the client vlan. Something like: interface Vlan172ip dhcp relay address 10.10.3.255...interface Vlan1020no shutdow...

uhabbe · 01-20-2003

The problem is that I don't know exactly when the routers were purchased. They belong to a new customer of us. Assuming that the format of the processor board serial number is the same as the format of the router serial, the routers were manufactured...

Member Since	‎10-14-2002 02:34 AM
Date Last Visited	‎05-28-2024 01:05 AM
Posts	10

User Statistics

User Activity

WIC-1ENET and 1750 Processor revision

BRI with isdn answer1 configured does not answer calls

Re: Reading routing table for different VRF's by SNMP

Re: Cisco Catalyst 9500-24Q ip helper-address problem

Re: Cisco Catalyst 9500-24Q ip helper-address problem

Re: hi Georg,

Re: WIC-1ENET and 1750 Processor revision