Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Is 'NAT to interface IP' supported on Cisco VPN Hardware Client or EasyVPN Remote on IOS router and PIX ?I want to configure Hardware Client/EasyVPN Remote to:a) encrypt traffic from branch to HQb) NAT other traffic to interface public IP for inte...
Hi Joe,Please ensure that your equipment is running the correct software version.Minimum software version for:6500 switch - 12.2(33)SXIFWSM - 4.0.4http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#Servi...
Hi,I have tested the dhcp server and vrf on Cisco 3640 and it is working without VRF under the ip dhcp pool. Please ensure that you have configured routing for the dhcp-relay agent(VLAN facing dhcp client on 3750 in your case).
Hi there,You need to change your split-tunnel ACL to:ip access-list extended FEHD_VPN remark *** Outbound VPN client traffic *** permit ip 10.0.0.0 0.255.255.255 10.65.215.0 0.0.0.255Note: Not sure what is the purpose of 'permit ip host 0.0.0.0 host ...
