Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have on my network a gatekeeper based com 2501 that is used by 5 AS5300 remote gateways. This environment is working well.Now I need to redirect some part of VoIP traffic (where I don't have POP) to another network. So, we install another 2500 with...
In my environment I have a thousand of remote DLSw+ peers configured with circuit-count and costs. In a datacenter I have 8 routers to terminate DLSw+ connections. Working only with DLSw+ all remote peers establish the circuits in a balanced mode bet...
I just install a network based on layers of access (to WAN), DLSw and CSNA. When we start the tests some remote devices start a DLSw circtuits and SNA traffic with no problems, but other devices (SDLC) on remote sites start a DLSw traffic but can't s...
I would like to limit the traffic from some remote sites to connect to my central routers running DLSw. I think to limit this connections using many Loopbacks interfaces with many statements : dlsw local peer peer-id <loopback 0 address> dlsw local p...
I have the same problem, My Cat3524 have all to work, but my int vlan 10 allways down. See the configurations:SHOW VLAN BRIEF10 200.0.2.0 active Fa0/22, Fa0/24SHOW IP INTERFACE BRIEFInterface IP-Address OK? Method Status ProtocolVLA...
Thak you for your reply.The are other problems in tis environment due to configuration order of statement dslw peer... When this first configured peer fail, the router send the statement do the end of peers list configured, like a FIFO fashion. When ...
There is no way to provide some load balance between 2 CIPs on same router and transparent bridge?If I put one Ethernet interface for each CIP, is possible to do this ?Exist any way to create a "virtual MAC" to respond to end devices. In this case ea...
I'm thinking about Ethernet Redundancy feature. It works in this environment ?Router CIP-1, 2, 3 and 4One gigabit interface with 4 subinterfaces (one in each VLAN - A, B, C and D) - encapsulation ISL.Router DLSw-1One gigabit interface on VLAN ARouter...
