Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Today my ASA started blocking Godaddy. I havent changed any of the configuration recently so I dont know why all of the sudden it started blocking Godaddy specifically. I cant open Godaddy or send and receive emails. My account with Godaddy works fin...
Hi,Internal users can access FTP server using it's public IP but external users can't access the same server using the same public IP. I have a nat statement as follow(LAN-Inside) to (AT&T) source static FTP-Server-Private A_12.218.61.83 dnswhere the...
We have purchased a Cisco 3650 switch. The switch is working fine and I can access it through an IP address in the default VLAN but I am unable to access it through out management VLAN (254). I have 4 other Cisco 3560 switches that I can access just ...
Hi All,
I have a Cisco 3560 switch. I have couple of ports in there that I cant use. When I connect a device to these ports I get network cable unplugged. The switch shows that these 2 ports are connected and packets are received through them. The in...
Hi Guys,
I have been able to connect to my FTP server just fine. I started loosing connection to the server as soon as I log on. I have tried several workstations on the network and I am faced with the same problem. I haven't changed any configuratio...
Paul,
that worked. Thank you so much for your time and effort. Does that mean that vlan.dat was corrupted, was that the reason I was having a problem accessing VLAN 254?
Paul,
access switch connected directly to core switch.
Port Mode Encapsulation Status Native vlan
Gi1/1/4 on 802.1q trunking 1
Port Vlans allowed on trunk
Gi1/1/4 1-4094
Po...
Paul,
here is the output of sh vlan br
core switch
VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default ...
George,
the output of spanning-tree vlan 254 is spanning tree instance for vlan 254 doesnt exist. I have already tried removing VLAN 1 IP address but that did not change the fact that I cant access the switch through the management IP address.
