Hello,   I was wondering. I have 2 3750 stacked. One of it had an issue with the fan and had to take it out. I ordered a new one but it came with a different image as the one that is working right now. The new one has c3750-ipbase9-mz and the old htat is Online now has ipservices   Will it work if I stack them with different image?   Thanks ... View more

hello team,   I was wondering, I don't think it can be done with the equipment I have but I thought I might ask.,   Simple design, Cisco1941 - Switch SG200 - Server ESXi The server is connected on a port, belonging to Vlan 5 - 192.168.5.1 and goes out on internet through trunk.   Now the managers asked me, with the existing equipment if I can make another Vlan, vlan 20 with IP 192.168.5.252 so they can raise VMs in ESXi with 192.168.5.252 and the other halfs with 192.168.5.1. I know that can't be done since its on same subnet... Is there another way to achieve that? 2 gateways on same switch? or would I need another swtich with hsrp capabilties?   Many thanks ... View more

Hello team,   Could you please enlight me on the below matter please. I have a cisco 1841 (yes old one) in production with image c1841-adventerprisek9-mz.124-22.T5.bin   I would like to install anyconnect predeploy pkg. i know that if you have an IOS with Adv Security and above it will work (no other special reuirments needed) Is that correct? Am I missing something? ****************************************** For the Cisco 870, 1800, 2800, 3800, and 7200 series routers, licenses are cost-effective paper licenses just like CCME or SRST licenses. There's no software key to enable the feature hence there is no support issue with using Cisco IOS SSL VPN once you have the Advanced Security or higher Cisco IOS image loaded on the Router. You can purchase the Feature license as a spare in packs of 10, 25 and 100 simultaneous users directly from Cisco.com configuration tool. If you already have a router, use the spare SKUs as follows: FL-WEBVPN-10-K9= FL-WEBVPN-25-K9= FL-WEBVPN-100-K9= depending upon the number of supported users for your platform. ******************************************   Thank you   ... View more

Hello,   I have a pretty much confusing situation. I am living in Greece (unfortunately) were technology is 20 years late. Our providers lately embed Telephony with Internet (for cost purposes) so the phone basically connects to FXS port behind a basic router to work. Now this situation is not very flexible as when we are trying to put Voip Centers with cisco equipment (we are bying mostly 800series) the phones simply do not work. Now I am wondering (although I haven't heard of anythign like that) if there are any equipment by Cisco 800series with FXS ports to pass the VOIP from the router so we can install Voice Centers with Cisco GW and not the GW given by providers (which are plastic cheap equipment with basic configs) If there are such equipments can someone share a site on how to config the fxs port?   Thanks in advance. ... View more

Hello Team,   I was wondering whats the throughput for a Cisco3925. I tried to find the info online but no luck. I could find only for Cisco3925E.   Thanks in advance.   ... View more