Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, have recentley moved to a new company, who have an existing telecomms services company managing their Phone system. As part of a series of network upgrades, I am proposing to install CCM as a secondary swtichboard to serve one of our new sites, a...
I am getting a problem on one client:WIN 2k, using a CB21AG card.Using LEAP authentication, with AES encryption.I have exactly the same setup on a large number of clients, and they all work fine; however when this one tries to authenticate to the net...
I am using the AIR-CB21AG card in an XP laptop, I am authenticating to the AP using WPA-PSK with AES encryption.Everything works fine, however after approx 12 hours the card seems to un-associate from the AP and just says 'authenticating'. If I re-se...
Does anyone know if the Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter· AIR-PI21AG-E-K9will work on windows 2003 server, I'm not sure if it comes with the correct drivers, as very few Client adapters do.If not, can anyone recomend an adapt...
Whenever I try to load the Corporate Directory or the IP Services menu on my 7920 I get the "Request Fail" message.Have tried changing the setting on call manager, but doesn't appear to allow ip services or coporate directory. Using Call Manager 4.1....
Check if you have the "Dialin Permission" option checked withinExternal User Databases -> Database Configuration -> Windows Databse -> ConfigureIf this is checked, then the user needs to have Dialin Permission within the Active Directory Account.Also...
MD5 will work as an authentication method.If you want to use a certificate then you will need a certificate server to obtain the certificates from. Do you have one of these, or can you set them up? Have you worked with certificates before? Installing...
If you want to use PEAP then you will need to install a certificate on your server, and all your clients. You can use Just MD5 for Dot1x.. Ensure the EAP-MD5 box is checked on the Global authentication page, and that the MS-CHAP version 1 version 2 ...
