About jimirwin

jimirwin · 07-06-2004

Hello,Please pardon my entry-level knowledge of how these things work... I am the customer. A basic representation of the network is:CEa-----PE-----PE-----CEc| | | CEb-----PE-----PE-----CEdAll CE locations...

jimirwin · 06-29-2004

The network is a hub and spoke wherein there are 2 spokes and the spokes have an ISDN backup link between them.The MPLS provider offers the Peer VPN Model (PE-based), with the peering taking place with eBGP. My understanding of the Peer VPN is that ...

jimirwin · 09-28-2004

Also, you may try to put the switch in VTP transparent mode. http://www.cisco.com/warp/customer/473/103.htmlpage 7, as one of the advantages to transparent mode:"The extended VLAN range in CatOS 6.x, numbers 1025-4094, can only be configured in this...

jimirwin · 09-22-2004

if your s0/0 is the dce, you probably need a clock rate.also, try defining your pvcs.example:x25 pvc 5 svc 101600 packetsize 128 128 windowsize 2 2 x25 pvc 6 svc 101600 packetsize 128 128 windowsize 2 2 clockrate 9600 sh x25 vc to verify

jimirwin · 09-02-2004

Buy one, install it and configure...http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html

jimirwin · 09-02-2004

Hi,The error appears on interface ATM 1/0.6, not the interface you posted in the configuration. I understand you may be only using hsrp on the interfaces you posted.So, I would look at the lane\vlan segment hanging off of atm 1/0.6 and track it down...

Member Since	‎06-29-2004 08:47 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

CE perspective questions

overlapping addresses

Re: Cannot create Vlans on extended range

Re: X.25 to TCP translation with multiple X.25 VCs

Re: Add an 1enet to Cisco router 2611

Re: HSRP