Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have two routers connected to my LAN via switch, only one router can ping the other router. Scenario:Router A: is an internet routerRouter B: 2nd router connected to the same networkRouter A is the only one can ping router B but router B cannot ...
Hi,I need help in allowing the internet to access by our warehouse.Scenario 1:We have three routers installed1. Internet Router2. Head office to Warehouse interconnection3. Warehouse to head office interconnectionScenario 2:Internet router and (Head ...
Hi,Objective: Connecting our Head office from two different locations a) Warehouse b) Facotry. We already working on our head office to our warehouse via leased line but our factory connection via satellite connection.Scenario 1 : We have our leased ...
Hi,I have problem connecting to our unix server.Problem: When I run ftp on our unix server this error i got "Connection Closed by Remote Host".Scenario: We installed router from Head Office to our warehouse via leased line connection. In order for ou...
Hi,I am looking for a specific software that manages network status specially for the hubs and switches btw we use Cisco 2950 switches on our network.. Is Cisco Works 2000 is the best choice for these needs..Or can you advise me for the best solution...
Hi Weslin,Thank you for your response on my query, can i have a questions on your comments:1. Your Comment: If you can change the 192.168.0.x/24 to a different subnet such as 192.168.1.x/24. Question: Where will i assign these values? Anyway on my ro...
Hi GP,Below are the configuration of both routers:Router A:interface Ethernet0 ip address 212.12.17X.X 255.255.255.240 ip access-group viruses in ip access-group viruses out ip nat outside rate-limit input 256000 16000 16000 conform-action continue e...
Base on the configuration Internet Router is using an F0 ip: 192.168.0.5 subnet: 255.255.255.0 while the Head office to warehouse router F0 ip: 192.168.0.3 subnet: 255.255.255.0.These two routers were connected on the same network switch.. Is there ...
Hi,I could not ping the internet router from the head office router since the ethernet for ip address is in the same series with the head office router. How can i make a good configuration for this?Internet Router:F0=192.168.0.5 subnet 255.255.255.0H...