Hello There,I am unable to ping 31.225.16.1 loopback of internet router as it is advertising in bgp from r30 as it is connected with r29 with ebgp and r29 and r39 back to back connected along with ibgp. Please see my configs.r29 and r30 > ibgpr29 con...
Hello Everyone, respected members i have question that, does CCIE number will automatically reflect on my company's profile or do i need to add manually on company profile as my company is partner with Cisco and all my certifications are sync with co...
Hello,
Can someone help me here....
As per the diagram my primary Site to site is active with ISP1 and we want to keep Active failover with second ISP2, whenever primary goes down so we can use active failover with second ISP2 and my primary router h...
Hello,
I have Cisco 887v router with C800 Software (C800-universalK9-M) Version 15.3.
My Scenario i have a ISP-1 with cable modem another ISP-2 with static WAN route. I want ISP-1 for IPsec VPN and ISP-2 for default internet.
PLEASE HELP ME...how ...
Thanks for your help and advise,can u help me with preffix-suppresion command after enabling physical interface not pinging on via source loopbacks able to ping
yes brother, its pinging now, i didn't advertise lo0 in IBGP and that lo0 was only in OSPF so that was the reason destination don't know the r30's loopbck. now i adervsite loopbcks also in ibgp its working but now rib failure R-30#ping 31.225.16.1 s...
I attached toplogy snapshot also for understanding. R-30#show ip route 10.2.255.29Routing entry for 10.2.255.29/32Known via "ospf 1", distance 110, metric 2, type intra areaLast update from 10.2.90.1 on GigabitEthernet1, 01:28:45 agoRouting Descripto...
I really appreciate your prompt response,i have tried to ping via source but couldn't reach, i have placed routing table also and some ping . and that rib failure is not serious concern but thanks for your suggestion on that. any other suggestions mo...
