Hi, We're trying to get this LC working in an NCS5508 chassis. We upgraded the fabric cards and fan trays to the second-generation version and installed the LC in the chassis alongside the older NC55-18H18F.The fan trays and fabric cards are working ...

Hi, as per the topic title is there a command that will allow me to display the traffic stats of a l2transport interface or is this achievable only through SNMP?Thanks a lot

Hi, I am trying to configure SNMPv3 on ios-xr 7.9.21, and I am a bit confused about the role of the community string in SNMPv3, I thought that v3 had an user based model and that community_strings were a SNMP v1/2 concept but when I try to enter the ...

Hi, in our network we're utilizing an ASR9k as BNG, running 7.3.2. Due to network design, the interfaces of the router that connect to the network's core are also utilized in the Generic-interfaces-list. This means that whenever we perform maintenanc...

Hi, as per the title, after we upgrade a NCS5508 to 7.7.21 from 7.3.2, the standby RP can no longer be utilised, it goes in a boot loop.What I've observed is the following: The RP can bake the XR image successfully however at the end I see this in th...