Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a RV340W that freezes randomly. It has 2 VLANs and routing is enabled between them. About 3-4 times a week, the router stops responding to the IP on either VLAN and I have to reboot it. The logs show nothing. I thought maybe something with my...
Does anyone know the online link to get a service contract quote on a router? I have tried for days to find it. Cisco's site is such a jumbled mess of broken links and 404 pages.
I have a simple static route in my RV340W pointing to another internal subnet. I can ping the machines but cannot access any shares on the other subnet. The firewall appears to be blocking port 445 between subnets.
Does anyone know what I can check...
Does anyone know the correct settings to access the console on a RV340W via the serial/console cable via PuTTy? I have tried about every combination of settings I have found on the internet and I cannot connect to it.
I CAN see the boot up info whe...
I am requesting assistance with a simple static route.
I have 2 small LANs - 192.168.100.0/24 and 10.0.0.0/24. The RV340W is the main router connected to the internet. It is the gateway for the 192.168.100.0/24 network and has a 192 address on the ...
I was told the static routes will never work as-is like you may have been used to. You have to set vlans.Do both your networks plug directly into the router?
Nope. You'll need a beta firmware from Cisco is you want the console. It does not work with any official firmware as of now. I have been working for 18 months on the wireless bug and have been through this numerous times.
They way the engineer described it was setting up a VLAN without "inter-VLAN routing" and then using that new VLAN IP in your static route.
I was still confused as he tried to explain it, but he said that's the only way static routing will work on...
We're on our 4th Engineer trying to get the RV340W to stop freezing on us (and generating about 80K error packets a day when the switches attached have no errors).
He said static routing won't work without a VLAN stub. Kinda defeats the purpose.
