Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts,
We have a WLC 2106. Everytime this WLC reloads due to whatever reason then the time of this is always ressting it to about it to something else than the current time. We nothing in NTP settings before that we used to have NTP server con...
Hi Everyone,
We need to connect 2 switches together and have 2 options for them:-
1. Use access port on both sides
2. Use trunk port on both sides
All interfaces in the new switch are in same VLAN and there is no requirement to configure multiple VLA...
Hi Experts,
Issue: POE is not working on 1 port in one module.
Background: We have CISCO 4507 switch running with "redundant mode" power supply. Have enough power supply to support POE. But facing issues with POE on 1 port in 1 module (WS-X4548-RJ4...
Hi All - We had the exactly same issues and has been resolved now. See below:-- Issues were for wireless clients having NIC card/adaptor as "Intel(R) Wi-Fi 6 AX201" as those are compatible with 802.11ax.- I am anticipating that there may be issues w...
I already pasted info about "SH NTP CONFIG" command and this is where we can check NTP server/peer configs.sh ntp config ntp server 64.X.X.XIs this you are referring to as when you say NTP Master?
How to check if abut NTP MASTER? Please find below "sh sysinfo" (I have removed personal info) and I don't have another command available in WLC:-(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Prod...
1. I agree with this. Thanks for the info.2. Yes, it is not synchronized to any trusted NTP source. I don't understand about "sh clock" that you are referring to. Are you referring to my core switch? If yes, then I don't have "." 3. All my AP's are a...
Yes this is my core switch and X.X.X.X is actualy an ip address starts with 64.X.X.X.So, it means the clock on not synchronized with any trusted NTP source. But my question still remains same as why my WLC is resetting time and not other WLC is havin...
