Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Try putting the Ringer and Phone in a broadcast hunt group instead of sharing the DNexample 1900->Pilot 1901->Ringer 1902->PhoneI don't know how the ringer is connected but ATA's and FXS ports can't determine if the call on shared lines were answered...
IDivert is a softkey lay out. Put it on the softkey template you are using under ring in and connected templates. Then the user can divert calls that are ringing to their phone they don't want to answer as well as sending a current call to their VM.I...
If you are going to use Skinny try setting the Audio mode to 0x00160016.Just browse to the ATA then select the Audio mode tab and change to this param.Usually helps with Fax Pass Through.
the 2006 is for Trunk ports so you would have to hook it up to an FXO Port and you also need the 24Vdc adapter to supply batt voltage to the FXO port or it won't stay off hook. If you are looking for a station port Page adapter the Valcom 9940 is an ...
Clear the browser Temp Internet files Cookies and History files then close and re-open the browser. Chances are the settings for the browser are using the stored web page instead of pulling one from the server.
