Hi,You can either use static route or upgrade the 6500 to 15.1(2)SY which introduced BGP Support for IP Prefix Export from a VRF Table into the Global Tablehttp://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/release_notes.htmlB...
Hi Peter,what is the mtu configured on 20.20.20.2?What is the configuration of the underlying layer 2 port which is configured for bridge domain 50? Have you increased the MTU there?Also please do "sh ip int bdi 50 | i MTU" not "sh int bdi 50 | i MT...
Hi Peter, "MTU" configuration is not supported on BDI interface, it's a limitation. Only IP MTU configuration is allowed on BDI interfaces. You can try "ip mtu 1998". Best Regards,Bheem
For IOS yes but not for XR.http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fsldpsyn.htmlAn IGP will wait indefinitely for LDP synchronization to be achieved.In XR LDP and IGP doesn't directly communicate about the LDP state information d...
Unfortunately local label allocation filtering is not supported on the 6500, there is no available way to filter the local label allocation on the 65K as on 7600. http://www.cisco.com/c/en/us/td/docs/ios/mpls/command/reference/mp_m2.html#wp102990612....