Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have users attempting to connect to our VPN concentrator externally. It looks like the connection is made and then it is checking for username/password. After that it just does not connection [or authenticate] This points me to the ACS server th...
Hi all,I am looking to configure MLPPP to combine my [2] T1 serial interfaces to my ISP. I have looked a bit on the cisco web site for information on how to do so but to date cannot seem to track down a simple config. My other problem is that each ...
Our bandwidth to the internet is constantly at 80-95%. I need to track which applications are utilizing this bandwidth. Currently the edge router [2811] is connected to our 6509 core switch. I don't have any additional ports on the 2811 for an ana...
Can anyone recommend a bandwidth monitoring tool that can monitor specific router and switch interfaces and also provide real time and report logging? I need something that won't break the bank but does a good job. I would purchase Ciscoworks but un...
Can anyone point me to the links showing configuration examples on how to configure MLPPP on a 2811? I have 3-4 T1 circuits coming into the same router and wish to aggregate them into a single virutal interface. Thanks in advance ! :))
AD does support MSCHAP2 yes?There must be other engineers or cases on file in cisco speaking to this issue or at least a best practice configuration to get the connection between the Vista built in client and authentication through the ACS...
I am getting an error on the ACS .. 'auth type not supported by External DB' .. I am not using the Cisco client but the VPN client connection built into Vista. Any ideas on the error?
We are currently using a 2811 as our VPN termination point. It has worked quite well. Nice thing is you can easily route between your spokes if needed and the 2811 has enough horse power to handle what you are looking to do.
Thanks Martin. I just wanted to confirm the configs. Before config..interface Serial0/0/0 description ip address 1.1.1.1 255.255.255.252 ip access-group 101 in ip verify unicast reverse-path no ip redirects no ip unreachables no ip proxy-arp ip in...
