Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!
I do have a test lab about VPC, VXLAN and EVPN. When i setup the lab everything was working very good untill i do som tests. If you want to see the configration i have a link which i used.I do have changed IP-adress, VRF name, AS-number for BGP...
Hi!
I am trying to implement NEXUS on DC my organization see the picture. We are trying to run VPC between two NEXUS 93180 and with routing license to run ospf to the Central Core and that link is port-channel with vpc command, is there possible to ...
Hi!
We get this error one our interfaces today and pc which connected this port is not response any ping, can´t communicate anything, and we see trafic is comming on this port. We used wireshark and see ICMP trafic is comming on the port that we have...
Hi! Our organization use command "auto qos default" on core routers, and I do not know what that command can do. Our problem is: Output drops which are getting more and more every minutes, and then we suspected that "auto qos default" is the reason a...
Do you see a traffic on "Barracuda Web Filter". like the ping you try to "8.8.8.8" Edited:You have to have a routing back to the switch from "Barracuda Web Filter" to the switch. Check the firewall i you have policy that accepts the new subnet. HTHMo...
You do need a default-route that points to Barracuda Web Filter, if every traffic goes via Barracuda Web Filter."ip route 0.0.0.0 0.0.0.0 x" where x is IP-address off Barracuda Web Filter. HTHMohammed
Hi brdewal!
Thanks! Now i have configured that command and it helped.
NOTE: HSRP active for all Vlans on switch 1 and Switch 1 is also root bridge for all Vlans.
I do have another topology which i do have same problem but on this topology i am us...
Hi brdewal!
Thanks for your reply. I do have a backup link between LEAF-3 and LEAF 4 but not command "system nve infra-vlans X" I will test this command as soon as possible.
NOTE: This other question outside the topic!
Is this command "system n...
