Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI ALl,i have deploy several EWC and encounter a weird issue with the new arrival of C9115 APs.The AP is loaded with version 16.12.4a and the ap is not able to ping it own WMI interface and GW.i thought it will be due to old firmware version. i upgra...
Hi All,having issue implementing Qos for our Guest Wifi, with a thoughput of 20mbps.
Version 17.9.4a
Error: QOS_ERROR_MESSAGE-3-QOS_SSID_INVALID_POLICY: Chassis 1 R0/0: wncd: ERROR: Policy wish-guest-Qos-20mbps is invalid in Upstream direction for va...
Hi All,
Trying to make full use of the 9136 dual port. Enable LAG on WLC 9800-L-C for AP Profile.However, the ports configured with LACP won't work on the switch side.when I switch to the Normal Trunk port it works.Does the AP not need LACP on switch...
Hi All,
i have performed a firmware upgrade from 17.6.4 to 17.9.4a.after the upgrade, the web is not responding well. it takes a long time to load or does not pop up the window that i click on.
Example:
edit a site tag, the loading icon is just spinn...
Hi All,
Existing using 1852E as Mobility Express, with version 8.10.185Purchase C9115 EWC as the new Controller, with version 9.16.4. Based on the Compatibility Matrix, 9.16.4 is able to support 8.10.185
https://www.cisco.com/c/en/us/td/docs/wireless...
All 6 APS in 16.12.4a same issue. only capwap mode able to ping gateway and its own interface IP.only in EWC mode it fail to ping even though ip routing and routes are configure.
I used an existing running EWC as the Master controller. Change all new 9115 APs to CAWAP mode and join and re-update the firmware to 17.9.5.subsequently change 1 AP to EWC and run. Then it works.
After long search and help from our distributor. There a additional feature need to enable .AP LAG mode under wireless global need to enable, which was disable by default.
