I am trying to set up a Netscreen to Pix 506 (ver 6.3.5) VPN. The Netscreen has a static public IP and the Pix has a dynamic public IP. If I set the tunnel up as static IP's on both end it works fine but fails when I go back to dynamic on the Pix. D...

I have an ICS 7750 running 3.2. I have a remote gateway with 7940 phones where the main number rings to 7 phones as a shared line. They need to call forward to a this main number to a answering service after hours. Do I have to a cfwdall on on each p...

I have picked up on an existing problem where my client has a working 515 pix with about 20 tunnels and internal servers with appropriate ACL's. They want to migrate this config to a new redundant pair of Pix 515 firewalls. They had already attempte...

I am looking to implement a vpn tunnel that allows clients at site "B" to acquire a DHCP'd address from a Windows DHCP server at site "A". The tunnel is up and working, I can statically address a client at site "B" and ping the DHCP server at site "A...

Loaded Cisco Works months ago now finally trying to use it but discovery is not happenning. It points to the ani server not running but the process says its running with the busy flag set, which could be a normal indication. Following message in the ...