Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want do a load balance links between 02 ISPs (different AS),I have 02 Cat 3560( but, 3560 does not support IBGP). I think use MHSRP(02 groups for load sharing) and BGP for the external links. This solution will works ?Any suggestion ?TIAAlexandre
Hi,My optical link (single-mode cable) have a short distance (30 meters). I will use LX/LH GBIC. Must I use optical Attenuator, or it is recommended just for ZX interface ?
Hi ,My customer want do a load balance links between 02 ISPs (different AS), He will use 02 Cat 3560( but, 3560 does not support IBGP). I think use MHSRP(02 groups for load balance) and BGP for the external links. This solution will works ? Any sugge...
Dear Martin, The 3560 does not support GLBP ( I verified at feature navigator) so, I believe that I need use MHSRP, Have I other option ?Thank you very much !
Hi, your tip, was great ! . I used the command showed at :http://www.cisco.com/warp/customer/105/56.html, I changed the DF bit, and the Terminal Service works ! Thank you very much Alexandre
