Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Expert,My customer have used Cisco SNA (Stealthwatch) and they just buy new switch using Aruba CX which do not support Netflow (IPFIX support but for limited capability). I just thought after researched several info that Cisco SNA also able to mir...
Hi,I found configuration below on my customer switch:Extended IP access list ACL-POSTURE-REDIRECT10 permit tcp any 10.0.0.1 0.255.255.0 eq wwwAnyone know what is mean of wildcard 0.255.255.0 ?Glad to hear your response!
Hi,Anyone has Cisco ISE Posture configuration using Aruba IAP as Network Access Device (NAD) in both side? I try to find configuration on web but cannot found.Thank You!
Hi,I just thought that between VXLAN and L2TP are same to send Layer 2 transport over L3. What is the major different for these both solution beside the function (L2TP are VPN terms and VXLAN are switching terms)?Glad to hear your response!
Hi,
I was deployed Physical APIC Controller (Mini ACI) into our customer UTP Based Leaf (N9K-C93108TC-FX3P). The APIC Controller use VIC1455 / APIC-PCIE-C25Q-04 and I added that VIC with SFP-10G-T-X for connect to the Leaf, In Leaf side the LED was g...
Hi Jamegill,Thanks for replied, Could you help me to share URL for configuration in SNA side (especially in flow sensor) if we want to receive flow data from mirroring? Its really hard to find it.Glad to hear your response.Thank You!
Hi,
Are the symptoms of LLDP enable on APIC Server same as what happened to me, where VIC 1455 with sfp-10g-t-x connected to leaf, the led on the leaf side lights up and the led on the server turns off?
For your information, I use 4.2(3e) for CI...
Hi Abhjha,
So, if we use ACI 6.0.2 (in our spine & leaf switch) and want to deploy all APIC in VM, what product name of controller which we order in CCW?
Thank You!
