Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The preferred/recommended settings are truly based on the rest of your infrastructure and security policies. I have included a link to a page that lists the options for security.http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/...
VTP is Vlan Trunking Protocal - This is a management that allowed for the sharing of vlan information - Has nothing to do with Interface information. If you setup your Physical Server (with the Virtuals on it) as a trunk port, native vlan 93 since y...
I had a similar situation. Even without a firewall, do you have any ACL's on the switches or any other link. If we look at the call flow it might make more sense.Phone calles Call Manager to initiate call - Call manager calls the end phone. Once t...
I have installed 462 of the 1131 Ap's in our environment, and here is the best way I have found.With the number of Ap's I am using Layer3 with a DHCP server with a scope for each subnet with option 43 giving the AP's all of the controllers addresses(...
I have not found an installation guide for that, but did work out a solution. Now I did use different equipment (I had 125 Cisco 1120 AP's and a seperate Small Office Router)What I did was create a Non-Routed VLAN on my LAN. Created an SSID (Broadc...
