Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
directly coming off the cable modem, i am getting download speeds close to 30MB at a remote site. Once i connect via VPN, i get download speeds just below 1MB? I get 30MB from my desktop from the HQ ASA.What could cause the poor speeds? This can't...
i have two 5505 ASAs connecting back to a central 5520 ASA via the easy vpn remote option. Each of the 5505s are on their own networks. How do i get network connectivity between the two remote sites? Thanks in advance.
Doing speed tests from speakeasy.net without going through the VPN Client I get roughly 31000kbps / 3500 kbps down/up. VPN connected I roughly get 1500kbps / 1000 kbps. Any ideas why download speeds dramatically drops? I know encryption taxes a par...
I get the error message:Error creating userCMSCommFailException: <ip address of node> Communications error (COMM_FAILURE) while attempting to set the SecurityModel::creatUser attributeAfter so, the TCC card will auto reset with NO new user.Can anyone...
3002-->5520.Under system status of the 3002. I have:IKE | public ip of 5520 | etc....IPSEC | public ip of 5520 | 3DES | HMAC/SHA-1| 0 | 0 | 0 | 0IPSEC | 0.0.0.0/0.0.0.0 | etc....Why do i have an ipsec tunnel with a remote address for the public inte...
RJ45 specifies the type of port you have. For a module to support POE, it should display the letter "V" at the end of the line card model when you do a "show mod".
