I want to monitor the number of calls active on my multiple E1 connections for my CallManager system which uses a 6509 and an E1 blade for physical connectivity. Is there a Mib variable to view the state of the E1 Channels on a 6509?
I'm looking for the mib variable that can indicate the number of active calls on an E1/T1 port. We are using the E1 card as an interface to the PSTN and I want to monitor the number of active calls to ensure we have enough inbound/uotbuond capacity
Thanks for the response but what I want to monitor is not the number of in/out bits etc but the number of active calls on the E1. This will be used to ensure that I have sufficent capacity for the phone system for inbound/outbound call activity. What...
Do you have the means of blocking specific TCP ports to your remote subscriber?All our phones are homed to the local subscriber. The DR subscriber is to cover main site outage so it currently is idle
More informationI've just shown the issue to our engineer and he is baffled as to why blocking TCP 8002 from our remote subscriber should stop the issue. My question to all other's with the problem is how many subscribers do you have and are any remo...
I'll join the growing number of people suffering from this issue. Here is my environmentDual 6509 at the coreMultiple 3750 floor switchesDual Servers with CCM 4.0(2a)sr1a at HO Site500 x 7940 phones with firware version 7.1(1.0)Single Server at Disas...
My only suggestion would be to use something like a packeteer packet shaping device. This device sits between your router and LAN segement and see's all traffic. You can then setup filters based on IP address/host name and monitor traffic volumes, pr...