Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I'm fooling around with ACLs in my lab and had a question. I'm trying to use a standard access-list to permit only a number of hosts to another group of hosts over specific ports. I've created object groups and reference them in the ACL. When...
With our new WFH environment at our company, the number of users connecting via Anyconnect has of course increased. Before it was only a fraction of our company but with the influx of users it is now being asked if it is possible for our users to not...
I am pretty sure I am missing something here but I have run into a wall and wanted to reach out to the community before anything else...
I have an ISR 4321 that is on IOS version 3.16.4 and I am trying to change the IOS version to 16.3.7 the curren...
I tried applying it to vlan 152 instead since that is closest to the source but seem to have the same behavior, I'm able to access the Web-IPs from hosts outside of the list of admin servers
These hosts are directly connected to the same switch just on different vlansso the sh ip route output doesn't yieldsh ip route 10.19.152.610.19.152.6/32, ubest/mbest: 1/0, attached*via 10.19.152.6, Vlan152, [250/0], 3d00hI thought simply adding an a...
The Web-IPs hosts are in the 10.19.0/24 vlan (let's say its vlan 2) while the admin servers are on the 10.19.152.0/24 vlan (let's say its vlan 152). I'm essentially trying to get a handful of hosts on vlan 2 only be reachable from a handful of hosts ...
This is the complete output of the that command once executed
%Error verifying bootflash:isr4300-universalk9.16.03.07.SPA.binComputed signature = e6771c4dc40345d594b2f7214b84d065Submitted signature = 2199a0e3c7a01bcb2e399c46f4ce694d
