Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We are evaluation the CSR1000V for a customer and want to deploy webvpn services on the same . We have already referred the availiable CSR1000V configuration guides but are not able to find detailed information for deploying WebVPN services .We a...
Hi,Just wanted to know whether the configuration limits of 512 vlan on Nexus 5010 specified in the document below are software limitation which can be removed by adding enhanced image etc or hard limits which cannot be removed.http://www.cisco.com/e...
Hi,Is it possible to create a custom event for Admin Down condition in DFM 2.0.13 in DFM-->Notification Services-->Notification Customization . There are currently 28 events , I want to add a new oneRegardsVijay SequeiraBundles Installed Bundle Nam...
I am unable to capture vlan port assignment data of a Cisco 6509 switch is Vlan port assignment . As per the device discovery details the device has been discovered successfully (also its neighbors). Is there anyway I can resolve this issue? also the...
I just need to know whether Cisco Security Manager can be installed on a virtual machine?, Is it supported by Cisco ?and will it function properly?Any documentation links to support the above would be most helpfull .RegardsVijay Sequeira
DNS is the mechanism the resolves the IP address to hostname.Yes the updated device name is present in DNS and the updated device name only resolves to the IP address.All invalid old entries have been removed.RegardsVijay Sequeira
Please find enclosed the screen shot of the port attributes, I have also enclosed a screen shot of the device collection metrics , if you look at the device collection metrics screen shot you will see after each poll one device is added or deleted , ...
Yes the device is currently appearing in the topology map and the port attributes are displaying the port details.But I am not able to obtain the data for the switch through VLAN port assignment.RegardsVijay Sequeira
Hi,The CW server uses ACS server for authentication only .(It is working in Non-ACS mode). Authentication Mode Radius (Fallback Mode) Authorization Mode CiscoWorks Local Single Sign-on Mode Standalone Devices not configured i...
there is a strange event that is occuring when I had last run device discovery after doing the changes , in the data collection metrics of the Campus manager home , the troublesome device was listed under "new devices" and was appearing in topology s...
