We have a new warehouse, it has about 50 bots running around and 11 AP's mounted (its about 120' x 300') We where told how and where to mount by a vendor but of course left to us to work out the issues. Anyway, looking for advice. Currently ha...
Good morning. We have a mix of AP's on our Mobility Express Network, 1852's 1832's 2702's and now i have a set of 3802i's that i need to get to join. Currently the MOblity express networks at my company are at 8.10.151.0 The 3802's came with 8...
Sorry if this is dumb question, new to POE and just trying to not make a stupid mistake by not asking questions. I have 7 1852 Access Points located in one area and would like to swap from power injectors to a POE switch so that i can have a clean r...
Found combination to get it working. Setup on network without existing ME. run the command: ap-type mobility-express tftp://#.#.#.#/AIR-AP3800-K9-ME-8-10-151.0.tar and it came up and installed the ME and then i was able to move it over and join ...
Quick Question, i don't have a /force-reload option. so would you suggest just /reload?AP7872.5D4F.2572#archive download-sw/no-reload No-reload after loading/reload Reload after loadingcapwap image download from wlc
FYI, Thank you, i will try the LIghtweight option. But the second option will not work. I have found that it will not make the jump from 8.5 to 8.10 without first being upgraded to at least a 8.8 version.
No matter what i try i seem to get the "image signing verification error" and it goes to part2.Loading file 'part1/part.bin' to addr 0x02000000 with size 62958260 (0x03c0aab4)...DoneSF: Detected MX25L3205D with page size 64 KiB, total 4 MiBChecking i...