About paulwtownsend

paulwtownsend · 04-15-2019

I’m struggling to get my head around the NATting of this concept. I need to setup a VPN between a clients ASA (9.2) and a supplier. As the supplier has multiply VPN’s they use only public IP’s in the configuration. Because I’m using a public IP for ...

paulwtownsend · 12-19-2016

Have a client who only had provision for single IP address on the outside interface. Now they have had a another /29 subnet as they needs have increase. The current outside IP has 4 L2L VPN and 9 DNS entries , so instead of have to rekey all the chan...

paulwtownsend · 03-16-2015

Hit a dead end with my knowledge of VPN and Avaya and so need some assistants. Originally just used the CLI to configure but after no success in getting the VPN to work moved to ASDM but I'm getting the same error on the phone. Connection from Mac OS...

paulwtownsend · 05-13-2019

Just had a call with the supplier at the other end, the config was right the IP addressing for both encryption domain and VPN peer were wrong as I'd been sent the old IP's and not the IP for the new servers. Once updated all worked. Thanks

paulwtownsend · 04-18-2019

Can't confirm it's worked yet as when I tried running a ping to get the tunnel up, ping failed no tunnel was made. crypto debug comes back with 'Error, peer has indicated that something is wrong with our message. This could indicate a pre-shared key...

paulwtownsend · 04-16-2019

Thanks I'll try this out tomorrow

Member Since	‎11-13-2006 03:57 PM
Date Last Visited	‎07-12-2023 12:04 AM
Posts	6

User Statistics

User Activity

VPN using public IP’s as encryption domain

Adding Second subnet to Outside interface ASA 5512X 9.2

Avaya Phone and ASA 5505 'Session is being torn down. Reason: Phase 2 Mismatch'

Re: VPN using public IP’s as encryption domain

Re: VPN using public IP’s as encryption domain

Re: VPN using public IP’s as encryption domain