Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if IPSK is supported on the virtual WLC platform? I know it's implemented in version 8.5, but I don't see anything on support for vWLC.
We're having an issue with simple MAB auth for some devices in ISE2.3. We can manually tag the port for the correct VLAN without ISE/MAB and it works fine. As soon as we default and configure the port for MAB it shows successful authentication/author...
You should post this in the Data Center or Networking forums. This one is specific to Cisco Identity Services Engine. https://community.cisco.com/t5/data-center-switches/bd-p/discussions-data-center-switcheshttps://community.cisco.com/t5/networking/c...
I was working off this:https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-5/b_Identity_PSK_Feature_Deployment_Guide.html which has these conclusions: IPSK is not supported on the Flex Connect locally switched mode. AAA server is re...
Fair question. We are trying to make the interface configuration as generic as possible and as such try to use the same one for each MAB port. The majority of our workstations and kiosks connect through a hub (or switch I think) on the phones. The ph...
Thanks for the reply Paul.
These devices have either static or DHCP reserved IPs. This one in particular is static both on the device and in our IPAM. It's not changing IPs at all, nor in this case is it changing VLANs. If I tag the port as access fo...
