Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to access a file share behind a router where I am using NAT.I have created a static 1 to 1 translation for the outside to the inside address so all other traffic like RDP (Terminal Services) works fine but I cannot get a file share like \...
Does anyone know which one is suppossed to be use for what country.I know that the difference is the impedance on it and I found the following:The Cisco ATA186-I1 and Cisco ATA188-I1 provide 600-ohm resistive impedance. The Cisco ATA 186-I2 and Cisco...
Is there any way I can limit the calling search space to where users can Transfer calls.I want to limit users to only transferring their calls to a numbers on the callmanager or a specified list of numbers.
We could use a pattern like [1-5]... which would match only numbers starting with 1 through 5.Regardless we need to look at what else could be going on.Can you try a test with a phone, Set the line css to the same as you have on the gateway and the ...
Rachel,I believe the Ringback you are hearing is what is happening from the time the ALERTING message being sent back to the PSTN and the DISCONNECTIf you look at the debug isdn q931 message you send an alerting message at 11:37:46.208 and then a di...
The problem you are having is probably more related to the the off hook timeout not so much a hold timeout.When you press transfer the system plays back dial tone waiting for someone to dial the first digits. This is controlled with the callmanager...
What is the model number of the blade/module you are plugging this phone into?The 7937G is an IEEE 802.3af PoE (Class 3 device) meaning it requires 15.4 Watts.If the module is a prestandard POE blade it will not be able to provide the correct power ...
You should see a CDR for the call terminating on the voice mail port.If your cdr program is not reporting the call it may be because the record to the original called number does not show any time elapsed for that call and/or the system may be discar...
