Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a Cisco FTD 2130 in active/passive config on which I need to migrate sec. zones/IGs/IP addresses for Outside/Inside interfaces from the existing 1G interfaces to new 10G interfaces.From my perspective the process of migration should loo...
Hello all,I have an issue where wireless users that are connecting to the guest wireless network by entering their credentials through the guest portal are losing connectivity at random intervals(usually within 1 minute of connecting).From the user s...
Hello all. I have a rather strange problem regarding the EIGRP on Nexus 93180 switches.The simplified net topology pic is attached.All locations are using EIGRP for routing and using the same AS number. A pair of Nexus switches(connected via VPC link...
Hi all,I have a following situation where I need to connect a user location to two data centers(primary and secondary) and extend around 15 VLANs to both data centers for redundancy.The connection to the primary data center is already configured and ...
Hi all,in one of our branch offices we have switched from a dedicated line between locations to a internet link(50 Mbps) with IKEv2 tunnel to the main office on our 891F router. Since the router is now connected to the internet we also implemented ZB...
Just an update as I have been fiddling with this on both ISE and WLC.It seems that the main problem is the mismatch between ISE and WLC regarding Reauthentication timers. Before I had this set only on the WLC to 28800s but after looking at the debug ...
I have done the debug for one client and I think that I'm either hitting the bug CSCwa20143 or there is some weird interection between ISE and WLC for client timeout.After removing session timeout on the WLC(was set to 28800s) the client connection i...
I managed to upgrade the WLC to the latest recommended version but the situation remains unchanged. The guest clients keep de-authenticating within 10-20 seconds of authorizing on the network.The users remain connected to the network but need to re-e...
Here is authorization profile WirelessGuest in the attach.The access list that is referenced on the profile contains standard access to the internet via the usual ports/protocols.
